Elegoo OrangeStorm Giga 3D Printer with 800 × 800 × 1000mm Build Volume & 300mm/s High-Speed Printing
Excludes GST
Produce Full-Size Parts in One Piece
Large-format FDM printing becomes significantly more difficult as print size increases because thermal inconsistency, vibration, extrusion instability, and long-duration material flow issues become more pronounced across larger parts. The Orange Storm Giga is designed to address these limitations by combining industrial-scale build capacity with systems intended to maintain print stability over extended production runs.
Its 800 × 800 × 1000 mm build volume allows oversized components to be produced as complete parts rather than segmented assemblies, helping reduce the alignment issues, weak points, and post-processing labour often associated with joining smaller sections together. To support consistent adhesion across such a large print area, the machine uses four independently controlled heated PEI platform zones that manage heat more efficiently while helping maintain more stable bed temperatures during large-format jobs
The extrusion system is engineered to maintain reliable material flow during long prints through a double-gear drive system, titanium alloy heat pipe, chrome zirconium copper nozzle construction, and a 60W ceramic heater with PID auto-calibration. These systems help regulate nozzle temperature consistency and reduce extrusion instability, which becomes increasingly important when printing engineering-focused materials or high-volume parts over extended periods.
For motion accuracy, the built-in acceleration sensor automatically compensates for resonance and vibration generated during higher-speed movement. This helps improve surface consistency and dimensional stability on larger prints where motion-related artefacts become more visible. Combined with a quad-core RK3328 processor capable of managing large-format slicing and multi-extruder workflows, the Orange Storm Giga is structured to support oversized production printing with greater reliability, efficiency, and workflow scalability.
Workflow Advantages
- Large-Format Production Capability — Produce oversized prototypes, tooling, props, and fabrication components as complete parts without redesigning around the limitations of smaller machines.
- Independent Heated Bed Zones — Start jobs more efficiently by heating only the required print areas, helping reduce waiting time between production runs.
- Multi-Nozzle Expansion Support — Increase production flexibility by running multiple models or material setups simultaneously within the same workflow.
- 300°C High-Temperature Hotend — Take on more advanced fabrication work using engineering-focused materials that demand higher and more stable extrusion temperatures.
- High-Speed Motion System — Maintain productive print output while still working toward reliable dimensional consistency on large-format parts.
- Auto Bed Levelling System — Spend less time manually calibrating large print surfaces and more time focusing on production.
- Resonance Compensation Technology — Print larger components with improved surface consistency and fewer vibration-related artefacts during higher-speed operation.
- Removable 10.1-Inch HD Touchscreen — Manage long-duration print jobs through a clear and accessible interface suited to active workshop environments.
- PEI Magnetic Build Platforms — Remove completed parts more efficiently and return the machine to production with less interruption between jobs.
- Industrial-Scale Build Height — Expand the range of projects you can manufacture, including tall architectural models, fixtures, moulds, and full-scale prototypes that exceed standard desktop printer limits.
Why Kyro Machines Recommends Elegoo
ELEGOO is widely recognised within the desktop manufacturing and maker industry for producing FDM and resin-based 3D printing equipment used across hobby, education, prototyping, and workshop environments internationally. The company has developed a strong presence within the consumer and prosumer fabrication market through a broad range of accessible manufacturing systems.
The Orange Storm Giga represents ELEGOO’s move into larger-scale FDM production equipment, combining oversized build capacity with features intended to support longer and more demanding print workflows.
At Kyro Machines, we selectively source equipment based on practical performance, reliability, serviceability, and suitability for real production environments. The machines we offer are chosen to support makers, educators, fabrication businesses, and production teams looking for dependable equipment with ongoing usability rather than short-term novelty.
Australian-based after-sales support is available to assist with machine setup, workflow guidance, and ongoing operational support.
Key Features of the Elegoo OrangeStorm Giga 3D Printer
- 800 × 800 × 1000 mm industrial-scale build volume for oversized part production
- Four independently controlled PEI magnetic heated bed platforms
- Heated bed reaches 100°C in approximately 17 minutes
- Supports up to four nozzles for simultaneous multi-model printing
- 300°C high-temperature nozzle assembly for broader material compatibility
- Built-in resonance compensation using acceleration sensor calibration
- Double-gear extrusion system with titanium alloy heat pipe construction
- 10.1-inch removable HD capacitive touchscreen interface
Technical Specifications
View Full Specifications
General
- 3D Printer Type: FDM
- Frame type: Open
- Maximum print size: 800 × 800 × 1000 mm
- Maximum printing speed: Up to 300 mm/s
- Recommended printing speed: 150 mm/s
- Layer thickness: 0.1 mm – 0.5 mm
- Recommended layer resolution: 0.24 mm
- Print resolution: 0.1 mm – 0.5 mm
Build Platform
- Build Plate: 4 × PEI Magnetic Platforms
- Platform size: 410 × 410 mm each
- Print platform treatment: Textured PEI × 4
- Maximum bed temperature: Up to 100°C
- Heating time: Entire bed reaches 100°C in 17 minutes
- Simultaneous or independent platform heating control
Extruder & Nozzle
- Extruder type: Up to four
- Nozzle diameter: 0.6 mm
- Maximum nozzle temperature: 300°C
- Double-gear extrusion structure
- Heating element: 60W ceramic heating pad
- Nozzle PID auto-calibration
- Nozzle materials: Titanium alloy heat pipe and chrome zirconium copper
Cooling & Motion Control
- Cooling system: Thickened double-sided cooling fans with intelligent control
- Built-in acceleration sensor for resonance compensation
- Bed levelling: Auto-levelling
Electronics & Interface
- Processor: 64-bit quad-core RK3328 SOC
- Processor clock speed: 1.5 GHz
- Touchscreen: 10.1-inch HD removable capacitive screen
Product Dimensions & Weight
- Product weight: 104 kg
Packaged Dimensions & Weight
- Packaged volume: 1326.88 L
- Packaged weight: 150.59 kg
Packaged dimensions
- Length: 136 cm
- Width: 123.5 cm
- Height: 79 cm
Carton Details
Carton 1
- Weight: 145 kg
- Height: 420 mm
Carton 2
- Height: 350 mm
Supplier & Product Information
- Supplier code: TL4982
- Product code: 50.201.019500
- Availability: Stocked item
- Note: Special order line; not stocked in all retail stores
Compatible Materials
- Filament materials: Not specified
- Supported filament types: Not specified
Warranty and Returns
This product is backed by the manufacturer’s warranty. Kyro Machines provides further support and guidance to help troubleshoot any issues and assist with the warranty process where required.
Due to the nature of specialised equipment, returns are handled in accordance with our Returns & Warranty Policy. If you’re unsure whether this machine is the right fit, we recommend contacting us before purchasing so we can help you make an informed decision.
If this fits your workflow and gives you the capability to produce the results you’re aiming for, add it to your cart to get started.
If you need help choosing the right machine for your workflow or use case, contact us and we’ll help you find the right solution.